Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Mott Haven, NY
We provide independent Lennox air duct cleaning across Mott Haven, and what makes our work here different is containment: many of these tenement duct systems tie into shared chimney flues, so a cleaning in one unit can push soot into a neighbor’s return unless the flue is isolated first. We’re not affiliated with or authorized by Lennox. We’re an independent shop that knows the brand’s equipment closely. From the walk-ups off Alexander Avenue to the brick tenements closer to St. Mary’s Park, we clean, repair and seal the whole system rather than one symptom. Call (855) 658-4004 for a free estimate.
Why Mott Haven Residents Choose Us for Lennox Service
Lennox equipment has its own habits, and we’ve learned them the way you learn anything: by working on the same brand again and again. Merit Series furnaces, Elite Series air handlers, Signature Collection variable-speed systems, XC Series outdoor units. Our technicians have up to 13 years of experience, and a good share of it sits inside tight Mott Haven chases where a standard vacuum head won’t fit and a full-size crew can’t turn around.
That matters because Mott Haven landlords and property managers don’t have time for hand-offs. One contractor assesses the ducts, cleans them with contractor-grade equipment, repairs and seals what’s failing, and handles the air quality side in the same visit. Rotobrush and Nikro gear does the extraction. Abatement Technologies tools handle the fine particulate that ordinary vacuums leave behind.
We use quality parts that fit your Lennox cabinet, and we’ll tell you plainly when a repair makes sense and when it doesn’t. Scheduling is straightforward: give us the building layout and unit access details up front, and we’ll plan around tenants rather than through them. Mott Haven is a place where that planning earns its keep.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Mott Haven
These are the Lennox-specific failure patterns we run into most in Mott Haven buildings, and each one gets worse when the local climate and housing stock work against it.
- Cracked heat exchangers in Merit Series furnaces. In Mott Haven walk-ups, oversized boilers were often retrofitted into forced-air systems, and the furnace short-cycles against a load it was never sized for. Repeated cycling stresses the heat exchanger until hairline cracks open, and combustion byproducts can enter the supply stream. This is a safety issue, not a dust issue, so we inspect and flag it before anything else.
- Dust-packed PSC blower wheels in Elite Series air handlers. Original PSC blowers in cramped vertical chases collect dense dust on the wheel vanes. Airflow drops, static pressure climbs across long return runs, and the unit works harder for less air. Compact tools reach these wheels; a shop vac doesn’t.
- Failed ECM blower modules in Signature Collection variable-speed systems. Mott Haven’s muggy summers put condensate on every uninsulated basement duct, and when it drips onto a control board, the module goes. Variable-speed systems are especially exposed to this.
- Corroded drain pans under Lennox evaporator coils. Shared-shaft tenement systems with poorly pitched retrofit drains hold acidic condensate against the pan until it corrodes through. Cleaning without fixing the pitch just buys time.
- Flue and chase cross-contamination. When a Lennox cabinet sits near an old shared chimney flue, dust and soot migrate into the return and coat the coil. We isolate the flue, clean, and seal the chase penetration with mastic so it stops happening.
Lennox Service in Mott Haven: What Local Conditions Mean for Your Equipment
Here’s the thing that neither a plain Lennox page nor a plain Mott Haven duct page will tell you: many tenement duct systems in this neighborhood tie into original shared chimney flues. That single fact changes how a Lennox furnace cleaning has to run. If a technician connects negative-pressure equipment without isolating the flue connection first, the suction pulls soot and debris straight out of the flue and into the neighbor’s return. In a building where units stack off the same shaft, that’s not a small inconvenience. It’s a mess in someone else’s apartment and a call you don’t want.
In a typical Mott Haven walk-up, a Lennox Merit furnace serving a top-floor unit pulls return air through a chase shared with the building’s old chimney flue. When the blower runs, dust and soot from the flue migrate into the return and coat the evaporator coil. A qualified local pro isolates the flue, uses compact negative-pressure tools in the cramped chase, cleans the coil and blower, and seals the chase penetration with mastic so the cross-contamination stops. That sequence – isolate, clean, seal – is the whole job in one sentence.
Lennox Models & Products We Service in Mott Haven
We service Lennox residential and light-commercial equipment across Mott Haven: Merit Series furnaces, Elite Series air handlers, Signature Collection variable-speed systems, and XC Series outdoor units. On the duct side, that means full system cleaning, video inspection so you can see what’s inside the system before we touch it, and heat exchanger cleaning done with the cabinet open and the exchanger inspected under light.
Parts choice follows the component. For safety-critical and ECM-matched pieces – heat exchangers, blower motors, control boards – we use OEM Lennox parts so the system stays matched. For filters, belts and standard capacitors, quality aftermarket parts do the job at a fairer price. We’re independent, so we choose what fits your equipment rather than what a manufacturer program tells us to move.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Mott Haven
Lennox duct and furnace cleaning in Mott Haven is priced per job by a written estimate, not per vent and not by a coupon figure. Whole-system air duct cleaning typically runs $450 to $900. Dryer vent cleaning is usually $120 to $250. HVAC and furnace cleaning falls in the $250 to $600 range. Duct repair and sealing depends on how much chase and joint work the building needs. Air quality and sanitizing is quoted with the cleaning.
What drives the number: how many units the building has, how tight the chases are, whether the flue needs isolating, and how much sealing the system requires afterward. The free estimate includes a video inspection of the system and a written scope, plus before-and-after photos of your own ducts so you know what changed. The written estimate sets the final price.
Call (855) 658-4004 for an exact quote on your Mott Haven building – estimates are free.
Serving Mott Haven, NY – Our Local Coverage Area
We serve Mott Haven and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Mott Haven
Yes. Exposed basement ducts in a Mott Haven building sit in humid, often uninsulated space, and the runs are short and tight compared with a suburban layout. We clean with compact negative-pressure tools sized for that space and check the duct insulation for condensation damage while we’re in there.
It can if the flue connection isn’t isolated first. Shared chimney flues and stacked shafts mean suction in one unit can move debris into another. We isolate the flue, contain the work area, and seal the chase penetration before we leave so the cross-contamination stops at your unit.
Usually it’s both, linked. High static pressure from a dust-packed blower or restricted return pushes the ECM module harder, and condensate dripping onto the control board in a humid Mott Haven basement finishes the job. We test static pressure, inspect the board, and clean the blower before recommending any part.
They do. Oversized boilers converted to forced air short-cycle the furnace, and that repeated cycling cracks Merit Series heat exchangers faster than steady operation would. Because a cracked exchanger can let combustion byproducts into the supply air, we inspect it on every cleaning and treat it as a safety finding.
Cleaning is usually the right call on a 10 to 15 year old Lennox cabinet that’s still structurally sound. A cracked heat exchanger plus a failed ECM blower in a 20-year-old Merit unit is where replacement starts to make more sense. Whole-system cleaning with coil work typically runs $450 to $900 in Mott Haven. Call (855) 658-4004 for an exact quote – estimates are free.
Service Areas Near Mott Haven
We work across the south Bronx and into upper Manhattan, including Melrose just north of us, Concourse and Morrisania to the west and north, and East Harlem across the Harlem River, plus Harlem. If your building sits near any of these, the same containment-first approach applies. Our Lennox service is independent and not manufacturer-authorized.
Book Your Lennox Service in Mott Haven Today
Ready to get your Lennox system cleaned, inspected and sealed properly? Call (855) 658-4004 for a free estimate on your Mott Haven building. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written scope, a flat price per system agreed before work starts, and before-and-after photos of your own ducts.
Written by the team at Air Duct Cleaning Mott Haven.