Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Air Quality & Sanitizing for Mott Haven Homeowners
If your apartment smells musty even after you clean, if dust settles on the sill a day after you wipe it, or if someone in the building has started waking up congested every morning, the problem usually isn’t the room. It’s what’s moving through the ducts. In the older multifamily stock around Mott Haven, where steam risers, window units, and retrofitted ductwork often share tight chases, contaminants recirculate through the same passages that supply your heat. Our technicians have up to 13 years of experience treating exactly that kind of system, and they carry contractor-grade equipment from Rotobrush, Nikro, and Abatement Technologies rather than shop vacuums. We work with your existing Honeywell or Aprilaire equipment instead of around it. Call (855) 658-4004 and we’ll set up an assessment.
What Our Air Quality & Sanitizing Service Includes
Air quality work is only as good as the cleaning that comes before it. Sanitizing a dirty duct just seals grime in place, so we treat the whole system as one job: dislodge the buildup, contain and extract it, then treat what’s left. Here’s what each part of the service covers.
Mold Treatment
Mold takes hold in ductwork wherever condensation collects: on cooling coils, in the plenum, behind wet insulation, or on the galvanized walls of a run that stays damp through the summer. You usually notice the smell before you see anything, and by then spores are already being carried into the rooms you spend the most time in. We locate the moisture source first, apply a Guardsman-line treatment to affected interior surfaces, and correct the conditions that let it grow back. If the growth turns out to be coming from a leaking roof or a plumbing wall, we’ll tell you that too, because sanitizing a duct won’t fix a building envelope problem that keeps feeding it.

Bacteria Sanitizing
Bacteria are the quieter problem. Duct interiors stay dark, warm, and slightly humid, which is close to ideal for microbial growth, and the same airflow that carries spores carries bacteria into living rooms and bedrooms. This matters most in households with infants, older adults, or anyone with a compromised immune system. We use a professional-grade sanitizing application on the cleaned interior surfaces of the system, applied after extraction so it reaches the duct wall rather than a layer of dust. The treatment is part of a documented process, not a fogging shortcut.

Odor Removal
Cooking smells that never leave, a faint mustiness that gets worse when the heat kicks on, pet odor that comes back within a day: these are usually source problems, not surface problems. A whole building can smell like one apartment’s kitchen because the duct system is one connected network. We clean the runs where the odor has settled, treat the affected surfaces, and where a system needs ongoing odor control we can discuss filtration upgrades that work with your existing setup. Masking an odor with fragrance doesn’t last a week. Removing the source does.

UV Light Installation
A UV light installed at the cooling coil or in the supply plenum helps keep microbial growth from re-establishing between cleanings, and it runs continuously without anyone having to think about it. These units are most useful in systems that stay damp, in buildings where a coil has had a mold history, or in households where someone is sensitive to airborne irritants. We install them in a way that’s compatible with your existing HVAC and filtration platform, so the install doesn’t fight the equipment you already own. We’ll give you a straight read on whether your system actually benefits or whether it’s an unnecessary addition.
Air Purifier Install
A purifier is the right answer when you want better filtration at the point of use: a bedroom, a home office, a room where someone sleeps with a cough. We size and install purifiers to the room and to your existing duct and HVAC layout, and we’re fluent working alongside Honeywell and Aprilaire systems. What we don’t do is sell a purifier as a substitute for cleaning a system that’s carrying debris. The two solve different problems, and if a cleaning is the bigger issue we’ll say so before you spend money on hardware.
Allergen Reduction
If you’re dusting twice a week and sneezing anyway, the debris is likely being reintroduced every time the system cycles. Fine particulates from settled dust, pollen that’s found its way indoors, and pet dander lodge in ductwork and get pushed back into the air with every call for heat or cooling. We use Abatement Technologies equipment to pull fine particulate out of the system, not just the visible clumps, and pairing that with a proper filtration setup makes the result hold. For a renter or a landlord working with a room-by-room complaint, this is usually where to start, because it addresses the top of the problem rather than a symptom near the register.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Air Quality & Sanitizing
Understanding the specific hardware in a building matters more than most people expect. A Honeywell system’s filtration and control layout determines where sanitizing treatment can safely be applied and where a UV unit will do the most good, and we’re familiar with where the components tend to wear or collect debris over a system’s life. Aprilaire is another platform we work with often, and we know the filter housings and humidification components well enough to clean around them rather than having to remove and re-rig them. Both brands appear in older Mott Haven multifamily buildings as retrofits, and a clean install and a sloppy one look identical until someone opens the panel.
On the equipment side, Rotobrush’s rotary brush and negative-pressure approach is the standard we build the cleaning around, because it dislodges material from the duct wall rather than just pulling loose dust down the line. Nikro and Abatement Technologies equipment give us the containment and extraction capacity to handle fine particulates and microbial concerns that ordinary vacuuming can’t touch. Whether you have Honeywell, Aprilaire, or any other make, we can help, and if your system uses a brand we don’t see as often, we’ll tell you what we can and can’t do with it before any work starts.
Signs You Need Air Quality & Sanitizing Right Now
Most poor indoor air quality doesn’t announce itself. The signals below are the ones worth acting on, and if two or more sound familiar, an assessment is worth the call.
- A musty smell that returns after cleaning. When the odor comes back within days of a thorough cleaning, the source is inside the system rather than on the surfaces you can reach. That pattern usually points to moisture in the ducts or on the coil, which is exactly the condition mold needs to spread.
- Visible dust settling on surfaces shortly after you clean. Some dust is normal; a new film appearing within hours suggests the system is reintroducing settled debris on every cycle. This is one of the clearest signs the ducts are holding material that should have been extracted.
- Family members waking up congested or sneezing. Symptoms that appear overnight and ease after time outside the home often track to what’s circulating indoors. Allergen reduction and a full cleaning are the usual starting points, especially in bedrooms served by the same duct run.
- Recent water damage, a roof leak, or a damp basement. Any of these can leave a duct system in contact with moisture it wasn’t designed for, and mold can establish itself within a fairly short window. A treatment after the water issue is resolved prevents a second problem from forming.
- A system that’s never been assessed. If nobody can tell you when the ducts were last looked at, they haven’t. In a building that’s had multiple owners or a string of short-term tenants, this is more common than a documented cleaning history.
Our Air Quality & Sanitizing Process – Step by Step
Here’s what actually happens on a job, in order. Nothing here should surprise you, and if it does, you should be asking your contractor why.
- 1
Assessment and air quality baseline. We inspect the system, look at the coil and plenum, check for visible moisture or growth, and ask about symptoms and history. If you’ve had water damage or a mold complaint, we want to know where. This stage sets what the job actually is.
- 2
Containment and negative pressure. Before any brush goes into a duct, we set up containment and negative pressure with Nikro equipment so dislodged material is pulled into the collection system rather than into your living space. This is the step that separates professional extraction from someone opening a vent with a shop vac.
- 3
Root-to-register cleaning. Using Rotobrush rotary-brush equipment, we work each accessible run from the source end to the register, dislodging buildup from the duct wall and extracting it under negative pressure. Fine particulate gets additional handling with Abatement Technologies equipment, because a brush alone won’t capture what’s small enough to stay airborne.
- 4
Targeted treatment. Once the system is clean, we apply Guardsman-line sanitizing and mold treatment products to the surfaces that need them, matched to what the assessment actually found. UV installation or purifier setup, if it’s part of your plan, happens here, so the treatment and the hardware work together rather than against each other.
- 5
Verification and documentation. We check the work, confirm airflow at the registers, and show you before-and-after photos of your own ducts. You should be able to see what changed. If a repair or sealing issue turned up along the way, we’ll lay out what it involves and what it costs before anything further happens.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Air Quality & Sanitizing Cost in Mott Haven?
Air quality and sanitizing work in Mott Haven typically runs a few hundred dollars for a focused treatment on a single system and climbs into the low four figures when you’re combining a full cleaning, mold treatment, and UV installation across a larger building. The honest answer is that the range depends on what your system actually needs, and any contractor quoting a firm number before looking at it is guessing.
| Service | Typical estimated range |
|---|---|
| Targeted sanitizing treatment after cleaning | $250 – $600 |
| Mold treatment on affected duct surfaces | $400 – $1,100 |
| Odor removal, single system | $300 – $750 |
| UV light installation at coil or plenum | $350 – $900 |
| Air purifier install, room-scale unit | $300 – $800 |
| Full cleaning plus sanitizing, typical apartment system | $600 – $1,500 |
Four things move these numbers: system size and how many runs are accessible, how much contamination the assessment finds, whether mold is involved (that adds treatment time and moisture-correction work), and whether you’re adding equipment like a UV unit or purifier. Something to watch for: a quote built around a per-vent price is almost always a teaser, and it’s the setup behind most bait-and-switch complaints in this trade. We don’t price that way. One flat price per system, agreed before work starts, with the written estimate setting the final number. Ways to avoid overpaying are simple: get the scope in writing, make sure cleaning is included before sanitizing, and ask to see photos of your own ducts rather than stock images. A free estimate covers the assessment, the scope in writing, and the flat price. No fee to come look.
Air Quality & Sanitizing Near Mott Haven – Our Service Area
We work throughout the south Bronx and into upper Manhattan, including Melrose, Morrisania, Longwood, Hunts Point, Concourse, Highbridge, and Washington Heights, with air quality & sanitizing available across the neighboring areas as well. Travel time between these neighborhoods is short, and assessments are usually scheduled within a couple of days of your call. Dispatch runs 7am to 7pm Sunday through Friday. For work in East Harlem, see our air quality & sanitizing page.
Serving Mott Haven, NY – Our Local Coverage Area
We serve Mott Haven and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Air Quality & Sanitizing in Mott Haven
It’s the part of duct work that happens after cleaning: treating the interior surfaces of your system to reduce mold, bacteria, and odors, and adding filtration or UV equipment where it helps. Cleaning removes the debris; sanitizing addresses what was living in it. The two are done together because sanitizing a dirty duct doesn’t accomplish much. If you want the full picture of what we do, start with air duct cleaning in Mott Haven.
Most single-system jobs finish in two to four hours, with the cleaning taking the bulk of that time and treatment adding less than an hour. Larger buildings or systems with significant mold growth can run longer, sometimes across two visits if moisture correction is involved. We’ll give you a time estimate with the written scope so you can plan around it. Call (855) 658-4004 to get that scheduled.
Typical estimates land between $600 and $1,500 for a full cleaning plus sanitizing on a standard apartment system, with individual treatments starting lower. UV installation, purifier hardware, and mold remediation push the number up, and the written estimate sets the final price. Call (855) 658-4004 for an exact quote, because estimates are free.
Yes, and those are two of the platforms we work with most often. We know where Honeywell filtration and control components collect debris and how Aprilaire housings need to be handled during cleaning so nothing gets damaged. If you have a different brand, we can usually still help, and we’ll tell you upfront if we can’t. Compatibility is checked during the assessment.
Same-day work is often possible when you call early, and we’ll give you a straight answer when you do. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed on Saturday.
We stand behind the results, and we’ll walk you through what’s covered before work begins rather than after. Before-and-after photos of your own ducts give you a record of what changed. Any specific warranty terms are confirmed in writing with your estimate. Ask about them when you call and we’ll go through the details.
Clear access to the furnace or air handler and to each register you want serviced. That’s most of it. Move anything fragile away from the vents, secure pets in a room we won’t be working in, and let us know about any water damage history or rooms where someone has respiratory concerns. The system will be off during cleaning, so plan for a few hours without airflow. Call (855) 658-4004 if you’re unsure what to move.
Schedule Your Air Quality & Sanitizing Service in Mott Haven Today
If your system hasn’t been assessed in years, or if something in the list above sounded like your apartment, the next step is a look at the actual ducts rather than another guess. We’ll inspect, explain what we find, and put one flat price per system in writing before any work starts. Call (855) 658-4004 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. No obligation, and no pressure to add anything you don’t need.
Written by the team at Air Duct Cleaning Mott Haven.